贵州青岩剖面青岩阶上部牙形石的发现及其意义     

武桂春  姚建新  纪占胜  王立亭 《地质学报》2008,82(2):145-154

在贵州青岩剖面的青岩组之上,原被认为是拉丁期的垄头组下部的层段中发现了牙形石动物群,除少量的分枝分子外,都归属于Neogondolella属,可鉴定为4个种,即Neogondolella bifurcata,N.constricta,N.mombergensis和N.navicula.建立了2个牙形石带,自下而上是Neogondolella bifurcata带和N.cinstricta带.牙形石面貌证明这段地层在时代上非常接近但尚未进入拉丁阶,属于安尼期中晚期,进一步的牙形石工作将很有可能在目前发现的牙形石层段的上部寻找到安尼阶和拉丁阶之间的界限,从而为青岩阶顶界的限定提供可靠的牙形石证据.此外,牙形石的发现还初步实现了青岩阶2大主导门类化石--牙形石和菊石在同一剖面的直接对比关系.  相似文献   

扬子及周缘地区上奥陶统-下志留统烃源岩发育环境及其控制因素   总被引：6，自引：0，他引：6  

严德天  王清晨  陈代钊  汪建国  王卓卓 《地质学报》2008,82(3):321-327

扬子地区下古生界发育了上奥陶统五峰组和下志留统龙马溪组两套有效烃源岩,查清其发育环境及其控制因素具有重要的科学理论和油气勘探意义.晚奥陶世开始,扬子地区进入碎屑岩陆棚演化阶段;五峰期-龙马溪期,扬子地区主体为局限的深水陆棚环境,总体呈现出浅水陆棚、深水陆棚、次深海共存的古地理格局.沉积体系展布和沉积演化主要受扬子陆块与华夏陆块的汇聚作用控制.扬子地区上奥陶统-下志留统烃源岩的形成与生烃母质生物的高生产力和高埋藏率、冰期-冰后期之交的气温快速转暖、海平面快速上升以及粘土矿物在有机质富集保存过程中的赋存驻留作用等密切相关.  相似文献   

新疆境内塔拉斯-费尔干纳断裂早侏罗世走滑的古地震证据   总被引：11，自引：2，他引：9  

乔秀夫  李海兵  王思恩  郭宪璞  司家亮  宗文明 《地质学报》2008,82(6)

在野外考察过程中,于新疆乌恰地区早侏罗世康苏组沼泽相砂岩层中,发现并识别出软沉积物液化变形层,变形包括负载构造,球-枕构造及卷曲变形构造。通过模拟试验的对比研究认为,该软沉积物变形机制与液化作用有关,触发沉积物液化的动力是古地震,并且根据地震震级与液化最大震中距的关系,推测出造成早侏罗世软沉积物变形的里氏地震震级为6相似文献   

鄂尔多斯盆地东缘煤储层微孔隙结构特征及其影响因素   总被引：2，自引：0，他引：2  

张松航  汤达祯  唐书恒  许浩  林文姬  张彪 《地质学报》2008,82(10):1341-1349

在对鄂尔多斯盆地东缘58套采自不同层位不同地域煤样显微组分测试和低温液氮比表面测试的基础上,从比表面积、吸附曲线形态、阶段孔径结构分布、阶段孔径比表面积贡献、FHH分形特征几个方面刻画了煤储层微孔隙特征。同时,就“孔比表面积—孔隙结构—煤物质组成与化学结构”这一因果链,分析了鄂尔多斯盆地东缘煤微孔隙特征与煤变质程度、煤岩显微组分以及矿物组分与类型的关系。研究发现,Ro在0.60%~1.91%范围内,比表面积及FHH分形分维数先明显降低,Ro至1.3%后又略有回升,同时吸附回线“滞后环”及分形尺度对应的压力范围明显减小,孔径3~4 nm“墨水瓶”型孔明显减少乃至消失,并成为比表面积减少的主要贡献者。在相似煤级条件下,惰质组分较镜质组分有更多的比表面积贡献。粘土矿物组分含量>10%时,孔径3~4 nm“墨水瓶”型孔对比表面贡献明显,且随煤级增高影响作用相对加大。  相似文献   

Seal integrity and feasibility of CO<Subscript>2</Subscript> sequestration in the Teapot Dome EOR pilot: geomechanical site characterization     

Laura Chiaramonte  Mark D. Zoback  Julio Friedmann  Vicki Stamp 《Environmental Geology》2008,54(8):1667-1675

This paper reports a preliminary investigation of CO₂ sequestration and seal integrity at Teapot Dome oil field, Wyoming, USA, with the objective of predicting the potential risk of CO₂ leakage along reservoir-bounding faults. CO₂ injection into reservoirs creates anomalously high pore pressure at the top of the reservoir that could potentially hydraulically fracture the caprock or trigger slip on reservoir-bounding faults. The Tensleep Formation, a Pennsylvanian age eolian sandstone is evaluated as the target horizon for a pilot CO₂ EOR-carbon storage experiment, in a three-way closure trap against a bounding fault, termed the S1 fault. A preliminary geomechanical model of the Tensleep Formation has been developed to evaluate the potential for CO₂ injection inducing slip on the S1 fault and thus threatening seal integrity. Uncertainties in the stress tensor and fault geometry have been incorporated into the analysis using Monte Carlo simulation. The authors find that even the most pessimistic risk scenario would require ∼10 MPa of excess pressure to cause the S1 fault to reactivate and provide a potential leakage pathway. This would correspond to a CO₂ column height of ∼1,500 m, whereas the structural closure of the Tensleep Formation in the pilot injection area does not exceed 100 m. It is therefore apparent that CO₂ injection is not likely to compromise the S1 fault stability. Better constraint of the least principal stress is needed to establish a more reliable estimate of the maximum reservoir pressure required to hydrofracture the caprock.  相似文献   

Anthropogenic affects on lake sedimentation process: a case study from Lake Sapanca, NW Turkey     

Alper Gürbüz  Ömer Feyzi Gürer 《Environmental Geology》2008,56(2):299-307

Lake Sapanca in NW Turkey is a fault originated freshwater basin fed by seasonally variable flows of 15 streams. Considerations of lake–river interaction, supported by statistical measures of 47 bottom samples, suggest that sediment transport and deposition within the lake is controlled by two types of human constructed structures in addition to natural factors: (1) the dykes constructed in the front of streams, which feed the lake by strong flows, to prevent the filling of lakebed by coarse-grained sediments; (2) the constructed regulator on the outflowing Çarksuyu stream results in a higher sedimentation rate of clay-sized material on the NE corner of the lake, which is extraordinary in the shelf environment.  相似文献   

Structural elements of the Makran region, Oman sea and their potential relevance to tsunamigenisis     

Mohammad Mokhtari  Iraj Abdollahie Fard  Khaled Hessami 《Natural Hazards》2008,47(2):185-199

The character of convergence along the Arabian–Iranian plate boundary changes radically eastward from the Zagros ranges to the Makran region. This appears to be due to collision of continental crust in the west, in contrast to subduction of oceanic crust in the east. The Makran subduction zone with a length of about 900 km display progressively older and highly deformed sedimentary units northward from the coast, together with an increase in elevation of the ranges. North of the Makran ranges are large subsiding basins, flanked to the north by active volcanoes. Based on 2D seismic reflection data obtained in this study, the main structural provinces and elements in the Gulf of Oman include: (i) the structural elements on the northeastern part of the Arabian Plate and, (ii) the Offshore Makran Accretionary Complex. Based on detailed analysis of these data on the northeastern part of the Arabian Plate five structural provinces and elements—the Musendam High, the Musendam Peneplain, the Musendam Slope, the Dibba Zone, and the Abyssal Plain have been identified. Further, the Offshore Makran Accretionary Complex shown is to consist Accretionary Prism and the For-Arc Basin, while the Accretionary Prism has been subdivided into the Accretionary Wedge and the Accreted/Colored Mélange. Lastly, it is important to note that the Makran subduction zone lacks the trench. The identification of these structural elements should help in better understanding the seismicity of the Makran region in general and the subduction zone in particular. The 1945 magnitude 8.1 tsunamigenic earthquake of the Makran and some other historical events are illustrative of the coastal region’s vulnerability to future tsunami in the area, and such data should be of value to the developing Indian Ocean Tsunami Warning System.  相似文献   

湖南石门杨家坪下寒武统杷榔组三段混合沉积研究   总被引：5，自引：1，他引：4  

董桂玉  何幼斌  陈洪德  罗进雄  秦志勇 《地质论评》2008,54(5):593-601

湖南石门杨家坪下寒武统杷榔组三段发育陆源碎屑与海相碳酸盐的混合沉积。综合前人研究成果,通过对研究区野外露头资料的详细观测和室内样品分析及数据统计等工作,对研究区杷榔组三段混合沉积进行了详细的研究。研究区混合沉积特征宏观上表现为由陆源碎屑与混积物交互沉积、碳酸盐与混积物交互沉积和不同类型混积物本身的交互沉积构成的混积层系,微观上表现为陆源碎屑组分与碳酸盐组分混合沉积所形成混积岩;混合沉积类型主要为内潮汐沉积作用和浊流沉积作用形成的复合式混合沉积Ⅱ,次为深水原地沉积作用形成的渐变式混合沉积,但是不同成因的沉积作用形成的混合沉积类型往往叠加在一起,形成复合式混合沉积Ⅱ+渐变式混合沉积的混合沉积复合体;混合沉积环境为深水斜坡,发育内波、内潮汐混合沉积微相、深水原地混合沉积微相和远源浊流混合沉积微相等类型;在沉积环境分析的基础上,根据内波、内潮汐沉积特征,剖析了混合沉积的沉积机理;结合混合沉积的成因、沉积机理、产出部位及沉积环境等因素,以沉积学原理为指导,建立了研究区杷榔组三段的混合沉积模式。  相似文献   

塔里木西部地区古生代断裂活动的方式和机制   总被引：15，自引：2，他引：13       下载免费PDF全文

李曰俊  吴根耀  孟庆龙  师骏  冯晓军  郑民 《地质科学》2008,43(4):727-745

基于系统的地震剖面解释及其与塔中地区的对比,本文探讨了塔里木西部地区古生代断裂活动的方式和机制。玛东断裂带是一条宽阔的北东向盖层滑脱型褶皱冲断带,前展式向东南扩展,冲断作用发生在奥陶纪末。巴东断裂(吐土休克Ⅱ号断裂)为北西向基底卷入型冲断带,奥陶纪末和中二叠世末发生冲断。巴西断裂和塔参2井南断裂是海西期的正断层。塔里木古板块古生代的发育受邻侧的造山带演化制约,近东西向和北东向断裂奥陶纪末的冲断是继承基底构造发育的。塔中地区的近北西向断裂是晚寒武世的新生断裂,加里东运动可分为两幕:奥陶纪末的冲断(艾比湖运动)和晚志留-中泥盆世的冲断-走滑,后者向西明显减弱。塔里木西部的部分北西向断裂(如康西断裂)可归入塔中北西向断裂系。北东向的玛东断裂带是其西的向北(东)冲断的吐木休克断裂带与其东的向南偏东冲断的塔中8-1井——塔中5井断裂带之间的调节断层。  相似文献   

Influence of Structural Non-Stationarity of Surface Roughness on Morphological Characterization and Mechanical Deformation of Rock Joints   总被引：2，自引：2，他引：0  

N. Fardin 《Rock Mechanics and Rock Engineering》2008,41(2):267-297

Summary Structural non-stationarity of surface roughness affects accurate morphological characterization as well as mechanical behaviour of rock joints at the laboratory scale using samples with a size below the stationarity threshold. In this paper, the effect of structural non-stationarity of surface roughness is investigated by studying the scale dependence of surface roughness and mechanical behaviour of rock joints. The results show that the structural non-stationarity mainly affects the accurate characterization of the surface roughness of the fracture samples. It also controls the amount and location of the contact areas during shear tests, which in turn affects the mechanical properties and asperity degradation of the samples. It is concluded that for accurate determination of the morphological and mechanical properties of rock joints at laboratory and field scales, samples with size equal to or larger than the stationarity threshold are required. Author’s address: Nader Fardin, Rock Mechanics Group, Department of Mining Engineering, Faculty of Engineering, University of Tehran, P.O. Box: 11365/4563, Tehran, Iran  相似文献